DEHN, Inc.

DEHNpatch is the first patch cable with surge protection in Cat 6 performance that can be used universally according to EN 50173 up to 48 V dc.

The design of the new surge arrester DEHNpatch as a patch cable is revlutionary. It allows not olny to equip new installations very easily, but also any retrofittings at existing installations without great installation work. DEHNpatch is simply plugged in betwen the patch panel and the active component (e.g. switch) instead of the conventional patch cable. The DIN rail mountable supporting foot with snap-in device provides safe earthing. For single application, a piece of DIN rail with fixing device is included in delivery. For mulitple applications the DEHNpatch mounting set would be helpful.

DEHNpatch patch cable fulfils the requirements of Cat 6 and can be used universally for nominal voltages up to 48V. Both existing applications in offices and industry like Gigabit Ehternet, ATM or ISDN, and future systems like Voice of IP and Power Over Ethernet can be protected. Thanks to its fully sheilded design DEHNpatch can be used in shielded and unshielded networks. The width corresponds approximately to a RJ45 socket. Thus up to 24 devices can be installed in one series and be integrated into a 19" rack.

The standard total cable length of DEHNpatch is 3m and 5m (other lengths available on request).

Learn more about the DEHNpatch Ethernet Cat 6 Patch Cable by visiting our site, DEHN-usa.com.