Lubbock , 79412

Hello,

we would be more than happy to help you with you cubicle purchase, please click this link www.sd-office.com. We have both new & used cubicles in stock and if you go to the top right of the page we can chat with you live and answer any questions you may have.

sd-office.com

Teak is protected by its own natural oils that migrate to the surface of the wood and make the wood virtually impervious to water. As such, the use of varnish, water sealers, and oil on Teak furniture is not recommended. Products such as varnish and polyurethane will peel and chip and are difficult to remove without vigorous sanding. Oiling teak will not prevent the wood from graying,and often results in mold and mildew growing on the furniture (which usually shows up as black dots or patches.) Removing mold and mildew on the surface will require washing the furniture with bleach and soap followed by sanding.

To clean weathered teak, a two part cleaner consisting of a step involving a base such as caustic soda and a step involving an acid, such as phosphoric acid. This product is easy to use and will produce dramatic results. First remove the piece from any finished surface or remove any items that might be affected by the cleaning process. Teak cleaner will not hurt the lawn or fiberglass but it may damage painted surfaces or stain a patio, always wear rubber gloves and goggles when using this type of cleaner. Using a hose, wet the wood thoroughly. Open the applicator lid of the first cleaner. It is best to work on a small area at a time, overlapping each area and working from top to bottom, not allowing the cleaner to dry on the wood. Scrub the base with a Scotch Brite pad or a soft bristle brush, the wood will turn a deep brown color. Rinse thoroughly, then apply the acid to the same area and scrub in the same fashion, the wood will then turn much lighter. Finally rinse the area thoroughly with water, the teak should appear obviously lighter and cleaner, if any stains remain repeat the process. The wood will lighten further as it dries.
Teak cleaner will remove teak oils, food stains, the residue of varnish, and teak sealer. Any solid surface coating like varnish must be removed before using two-part cleaner. Never use a brass brush or a pressure washer to clean teak, these methods will scour the soft grain of the wood causing a rough and splintery surface. Never use steel wool to clean teak because it will produce rust spots in the wood. Brass wool is acceptable but a Scotch Brite Pad is the best tool to clean teak.
Once the gray pigmentation and stains are gone and the furniture piece is dry, sanding any roughness of the grain can make the furniture seem just like new again.