Active Question

  1. Just changed door hinges on interior door. Now door won't stay in open position. How can I adjust?
    Tomgal

    Tags: door hinges, interior door, open position

    Show me another question! | Report Abuse

    Asked by Tomgal
    Answered 16 years ago.

7 Answers

  1. The Door Guy
    I have been bending hinge pins in that situation for years
    without any problems. The goal is to put a little pressure
    on the inside of the hinge barrel to create enough friction
    to stop the door from moving.
    Sometimes one pin does the trick some times you have
    to do all three to stop the swing if the opening is way
    out of plumb.
    Good luck with project!
    Links: www.thedoorguy.com

    Answered by The Door Guy 140 Placentia Ave, Pismo Beach, CA, 93449, 805-773-1175 (Novice with 60 pts.)

    Answered 15 years ago.

  2. Paul Davis Restoration of N Fulton & Forsyth
    You have inadvertently misaligned the door and it isn't plumb ( straight line from top to bottom) or the whole door/jamb assy wasn't hung correctly.. and please do not use a piece of cardboard. They have door shims thin wedge shaped strips of lumber just for this purpose at every ace hardware, home depot or lowes.

    Answered by Paul Davis Restoration of N Fulton & Forsyth 1360 Union Hill Rd Ste 3D, Alpharetta, GA, 30004, 770-360-7994 (Novice with 7 pts.)

    Answered 16 years ago.

  3. questionbot
    Either the door or the jamb are out of plumb, and the new hinges allow it to swing by itself, where the old hinges were probably stiff enough to keep it from moving. It may be possible to re-mortise or shim the hinges to compensate for this, but it would have to be determined how far off the door and/or jamb are first. Door and jamb will need to be checked with a level to find out. This isn't necessarily something you can fix yourself, unless you have the proper tools and some experience with doors. I hung over 300 doors last year, and ended up finding a couple that required a door stop to keep them from moving. One can only do so much with existing construction.

    Answered by Darryl61

  4. Laramie Construction
    If you have one of your old hinge pins you could try bending it first to see if that will solve the problem. Otherwise you will need to re-plumb the door. If this is out of your abilities then you will need to hire a contractor to do that part.

    Answered by Laramie Construction 608 House Street, Avoca, NE, 68307, 402-275-3200 (Novice with 102 pts.)

    Answered 15 years ago.

  5. Paul Davis Restoration of N Fulton & Forsyth
    Never ever bend the hinge pins or they won't slide in the hinge properly.

    Answered by Paul Davis Restoration of N Fulton & Forsyth 1360 Union Hill Rd Ste 3D, Alpharetta, GA, 30004, 770-360-7994 (Novice with 7 pts.)

    Answered 16 years ago.

  6. North Coast Home Improvement Corp
    Try bending one or more of the hingepins, just slightly should work. You can still get it in the hinge with a hammer.

    Answered by North Coast Home Improvement Corp 9360 Broadview Rd, Broadview Heights, OH, 44147, 440-526-0015 (Novice with 4 pts.)

    Answered 16 years ago.

  7. Eco Paint, Inc.
    Place a shim under top hinge. What makes a good shim is a piece of cardboard. Good Luck!

    Answered by Eco Paint, Inc. 1215 E. Arkansas Ave., Denver, CO, 80210, 720-409-1984 (Novice with 18 pts.)

    Answered 16 years ago.

For more answers on Just changed door hinges on interior door. Now door won't stay in open position. How can I adjust?, go to Answerbag.com.

MerchantCircle Answers

We have over 1,700,000 local business experts.