About Commercial Electrical Tools
Commercial electrical tools for electricians are a must. Electricians cannot perform or repair electrical problems unless they have the proper electrical tools. Electricians also have to make sure they have the proper tools to make it safe for the homeowner or business establishment. Insulated electrical tools reduce injuries if the tool comes in contact with the power source.
Soldering Iron or Gun
- A soldering iron is for work on wire gauges up to 18. The soldering gun is for light electrical work, up to 15 to 30 watts. If the wires are larger than 30 watts, a soldering gun will work much better. When purchasing a soldering iron or gun, make sure it is an electric soldering iron or gun, because there are other types.
Circuit Tracer
- A circuit tracer helps to diagnose the problem wires quickly. The circuit tracer has separate transmitting units and receiving units. The transmitter plugs into an outlet, which receives a signal into the wire. The receiver can also be used to pick out the correct wire that is damaged. Other uses for the tracer are to find connection breaks or if a breaker has been properly wired.
Cable Ripper
- A cable ripper is a U-shaped device that has a head for cutting heavy plastic casings that hold wires. The wires are coated with plastic and a layer of insulator to help with the cutting process. The cable holds the plastic wires and loosens and separates them. The wires are then attached to the electrical outlet.
Fault Finder
- A fault finder is a short circuit electric tracer. The fault finder can trace six to 42 volt wires and detect adjustable sensitivity. The fault finder has an eight inch probe, which helps reach wires in hard to reach places.