About Horizontal Window Air Conditioner Installation
A window air conditioner is much more affordable than a central air unit, but getting a horizontal window air conditioner installed can present a unique challenge, depending upon the size of the unit. You will need to add some support if it's a large window air conditioner.
Installing Small Units
For installing smaller window air conditioner units, around the size of an 8,000 BTU unit, you probably will not need to do much more than getting it in the window, pushing the sides panels out to meet the window frame and placing an insulating material into the gaps, such as Frost-King weather-stripping. Get it into tiny and small gaps to create an airtight seal on the inside and outside. Inspect around the window after installation for daylight coming through cracks so you know where to stuff the weather-stripping.
Installing Large Units
Large units, like 25,000 BTU units, need support. Either make or buy a support bracket designed for this purpose, or build a simple makeshift stand. Get the appropriate bracket before you start.
To make a makeshift stand, measure the distance between the unit's resting place (to the window's bottom edge) and the ground. Assemble three pieces of two-by-fours, two horizontal pieces about 24-inches long and one perpendicular piece for the height. Incorporate the thickness of the horizontal two-by-fours. Assemble to make a capital letter "I". Or, assemble and install the bracket.
Have two people available to do the installation. Two can lift and slide the unit in part of the way, then one should then go outside and assist with guiding it out and onto the support. Fill in gaps.
Be careful during the installation. It is a dangerous situation if the unit falls.