Previous Article

Online Newsletter Printing

Next Article

How Does Offset Printing Work?

About Types of Offset Printing Plates

Offset printing is a widely used method in which ink is spread on a plate that has an etched image. The image is transferred (offset) to another surface such as a rubber blanket and finally applied to the printing paper or surface by pressing paper against the rubber surface. Lithograph is a common name for this process which, creates many prints.


 

Sometimes referred to as lithograph, this method is cost effective and useful for printing large volumes of documents. Offset plates are usually made from aluminum or zinc metal, a combination of metals, papers, plastic, and other materials. The surfaces are normally treated to make them porous and to make the image area oil-loving and the non- image area hydrophobic. The surfaces are also coated with a photosensitive material.

The plates used depend on various things, as the color required, the type of press to be used and the quantity of the print runs.  In general, metal plates are more expensive, long lasting and accurate compared to the rest and paper plates are suitable for short runs.  Polyester plates can be used interchangeably with aluminum plates, especially for jobs requiring medium quality or smaller formats.

Offset printing makes use of planographic plates whose plane is flat, for example, the image areas are not raised or indented when compared to the non-image areas but are rather on the same plane.  

Eight common types on offset printing plates include:



  • Diazo plates, which have an organic coating and are developed using a special solvent and should be used within a year. These plates are used for about 150,000 print runs.

  • Photopolymer plates have very inert and abrasion-resistant coatings from organic compounds and last longer that aforementioned plated and can be used for about 250,000 print runs.

  • Ablation plates have been digitally imaged hence no need for chemical processing. They are used on CTP (compute to plate) imaging systems.

  • Silver halide plates make use of photosensitive coatings and their area of use depends on whether it is film of metal based

  • Bimetal plates use polymer coatings that have been sensitized. They are either copper plated or chromium plated and are the most expensive.

  • Others include the waterless, heat sensitive and electrostatic plates.