Auto Electrician Tools
There are a number of different electrician jobs available, but one of the most interesting is as an auto electrician. The tools an auto electrician chooses to use can be based upon personal preference, but there are certain tools that are required to repair a number of electrical problems found in cars. If you want to become an auto electrician, then you are going to need to become familiar with the most common tools used.
Scanner
A scanner, also known as a code reader, is used to view certain error codes that manufacturers store in a vehicle's on-board computer. The electrician will connect the scanner to the vehicle so that he can download and view the specific codes that will hopefully tell him what is wrong with the car. Once the vehicle has been repaired, the electrician can also reset the codes so the next electrician will know what the current problem is.
Jumper Wires
A jumper wire is a wire that has a metal clamp at each end. An electrician will use these cable to bypass any faulty circuits so that he can determine whether or not they are the source of the problem. The electrician will most likely also use them to connect certain components of the vehicle to a separate power supply so that he can isolate the area that is damaged.
Test Light
An auto electrician will use a test light so that he can test the continuity of certain electrical circuits, which will tell him if it is open or closed. All the electrician will do is ground the the test light and touch a metal probe to certain circuits to see if the test light will turn on. If the light does not come on during a test, then that is where the problem is located.