Best Methods to Keep Your Home Mold-Free

Mold in your home is very dangerous. It will cause damage to parts of your home and can also make you sick. Individuals who have respiratory problems and allergies are more susceptible to illnesses. Mold leaves areas of the home with a musty smell. It is important to remove the mold from your home as quickly as possible. Mold can be a very large nuisance if not treated promptly.

Non-ammonia/Water

Use several drops of non-ammonia detergent in a bucket of lukewarm water. Spray all the areas of your home that have been affected by the mold. This helps to keep mold spores from spreading any farther. Use warm soapy water to wipe the areas down after spraying the area. Make sure to always protect yourself from the mold while cleaning. You can use gloves and respiratory mask.

Steam Cleaning and Wet Vacuuming

Steam cleaning and wet vacuuming are easy and safe ways to remove mold. It is important to use this method at the first sign mold is growing on your carpets. When vacuuming, it can stir up mold spores. You can use goggles and masks to protect your eyes.

Bleach and Water

To disinfect mold on some hard surfaces, you can use bleach and water. A good bleach water ratio is a quarter of a cup to one gallon of water. Allow the bleach to set on the surface for 20 minutes; this will allow the bleach to disinfect the area. Rinse the area with clean water and then dry the surface.

Lemon Juice and Salt

For mold-stained cloth surfaces they need to be disinfected as quickly as possible. Mold will damage fabric beyond repair. Brush and wipe off as much of the mold as you can, this will help keep the mold spores from rapidly spreading. Wash the material with soap and water. Allow the fabric to dry in the sun. If the mold stains remain, use equal parts of lemon juice, salt and water on the mold spots. Then allow the fabric to dry again in the sun.