Best Way to Remove Mold From Electronics
Electronic equipment that generates heat is capable of mold accumulation when the item has been placed in a damp environment. Cleaning electronics is difficult because of the sensitive nature of such equipment. Although a professional should check computers and laptops with mold, other types of electronic equipment can be safely cleaned at home.
- Prepare to clean the electronic item. Unplug the equipment or remove the batteries. Move the electronic item outside if feasible. Otherwise, ventilate the area by opening windows and doors. Wear a mask to avoid breathing potentially dangerous mold spores.
- Create a cleaning solution consisting of one part white, distilled vinegar to two parts water.
- Examine the equipment to determine if the mold is on the interior, exterior or both.
- Remove the exterior casing of the electrical equipment. If the exterior shell does not have any attached wires, dampen a cloth with the vinegar cleaning solution and gently wipe the casing. If wires are attached to the exterior part of the equipment, take care to avoid getting the wires wet. Use a cotton swab dipped in the vinegar solution to reach mold in small crevices or compartments. Dry the exterior casing thoroughly using a towel.
- Clean the interior of the equipment. Check and remove any loose parts. Vacuum the interior of the item using a vacuum cleaner with a HEPA filter and a micro-vacuum attachment. Be extremely careful not to disturb the inner parts of the equipment. Use compressed air to remove mold particles. Vacuum any loose mold particles using the micro-attachment. Repeat the process if you find more mold upon further inspection.
- Reach small crevices on the interior parts of the equipment with a cotton swab if possible.
- Wipe monitors and screens very carefully using a soft cloth. If mold is present on these items, use compressed air and vacuum with a HEPA filter to remove the mold.