Best Way to Repair a Bad Engine Ring

The best method to fix bad engine rings is to replace them. Even though piston rings, also called engine rings, are pretty small and inexpensive, they play a huge rule in the way your engine performs. Replacing these rings is fairly simple if you have the right tools and follow the simple steps listed below.

The best way to fix bad engine rings is to replace them. The first step in replacing piston rings is to clean and degrease your engine as mush as possible. This will make it much easier to secure a grip on parts with your tools and also make it easier to identify parts of the engine.

Using your cars repair manual, begin to disassemble your engine. You have to be able to get to the engine's cylinders, so you will probably have to remove the engine head. Once you have reached the cylinders, scrape the surface above each one. Make sure you cover the cylinder holes so that no debris falls inside.

Carefully remove each cylinder and clean the carbon deposits from the pistons by soaking them in kerosene. Use a piston tool to remove any of the piston rings that are defective and clean the grooves with kerosene.

Using a feeler gauge, check the width of each ring groove to make sure that the meet the specification that you can find in your car's repair manual. If the grooves are excessively worn, you will need a whole new piston. Use you piston ring tool to replace any of the rings that were defective. Make sure that you don't stretch the rings to much because the will break.