Best Way to Replace a Dryer Vent Flap
All clothes dryers require a vent to remove the hot air and lint. The vent flap is located near the outside wall of your home. The flap allows the hot air and lint to pass through it when the dryer is on. When the dryer is turned off, the flap closes shut.
Sometimes this flap needs to be replaced if it is not opening or shutting properly. This is a fairly simple process that most homeowners can do on their own.
First find the white or silver coiled, flexible pipe that is connected to your dryer. This pipe is usually clamped on with a wide flat wire and can be loosened by unscrewing one screw with a flathead screwdriver. You only need to disconnect the end furthest away from your dryer, attached to your outside wall.
Make sure you have already purchased a replacement vent flap similar to the one you have. It will be easier to replace if it is the same size and shape. Many people choose to replace the entire venting unit when replacing the flap.
Once you have removed the end of the pipe near the wall, go outside to the vent. Remove the vent. This may take a little prying, as the vent has probably been caulked in. Replace the vent flap or entire vent unit. Replace the unit into the same place, after removing all excess caulking. Go inside the house and reattach the coiled pipe to the new vent. Tighten with the flathead screwdriver. Be sure to re-caulk the area to secure the vent in place and prevent leaks.
Make sure everything is tightly secured to the wall vent and to the dryer connection. You should notice immediately that your dryer is functioning much better with a new vent or vent flap.