Checklist For Toilet Installation and Repair
Repairing a current toilet or installing a new one is a project that many homeowners are faced with. Although not an easy task, repairing or installing a toilet is a job that almost every homeowner can complete without the assistance of a plumber. However, there are certain steps and precautions that must be taken before the project begins.
State and Local Codes - Check your state and local codes to make sure that you can repair or install a toilet without violating any laws.
Toilet Hardware - The essential toilet hardware includes the bowl, seat, tank cover and tank. These are all necessary to install a new toilet; simply purchase the parts that you are replacing if you are performing a repair.
Bowl Gasket - These are used to ensure a tight seal after you install the toilet. Forgetting this seal could result in a leak and subsequent water damage.
Flat-Ended Riser Tube - This piece of hardware connects the toilet tank to a water source.
Bathtub Caulk - This substance is applied to seal the area around bolts, some gaskets and other areas of the toilet that may be prone to floor-damaging leakages.
Supply Valve - The supply valve controls the amount of water, or water pressure, that reaches the tank of your toilet. This is a vital part of the toilet and can result in a leak and water damage, should it malfunction.
Plumber's Putty - This substance is used to ensure a tight seal where the toilet bowl meets the floor. The putty is also used to ensure that the hold-down bolts will stay in place during installation.
Tools - The tools required to install or repair a toilet are as follows: a large screwdriver, water pump pliers or a trap wrench, a small hacksaw and adjustable open-ended wrenches. These are the absolute minimum; other tools that are useful include wrenches sized to fit the nuts and bolts instead of the adjustable wrenches.
Hardware - The hardware required to install a toilet includes the hold-down bolts, tank mounting bolts, toilet flange, wax gasket, spud washer, coupling nut and trim caps. All of these should be provided with a new toilet, but some may need to be replaced when performing repairs.