Comparison of Roofing Felt and Tar Paper
Roofing felt and tarpaper is almost the exact same thing except tarpaper has taken place of roofing felt because of its better coverage. Both have the same exact use of being a waterproof material that goes on the roofs of houses. Tarpaper and roofing felt differ in the chemicals used.
Roofing Felt
Roofing felt has been used for over a hundred years and is still, although less prominently, used today. It used to be made out of recycled rags from the 1800’s up until the 1950’s from which they were replaced with recycled paper. Sawdust is another main ingredient in roofing felt, which isn’t used in today’s tarpaper. The new felts used also way much less since they are asphalt and cardboard based. Fifteen pound roofing felt is the most common, although it is susceptible to wear and tear and may form holes around the edges of the roof.
Tar Paper
The major difference between tarpaper and roofing felt is that tarpaper is made out of putting together paper and tar for a sticky surface. It’s much lighter than roofing felt and works well under wood and asphalt. Sometimes a mixture of both tar and felt can be used to create a barrier that absorbs vapors, hence making it extremely waterproof. Tarpaper should be covered with shingles since it is not heat resistant and can melt fairly quickly if being worked with in the hot sun.
The major difference between these two materials is what they are made of and how one is more advanced than the other. Tarpaper has the upper hand because of its lightweight.