Previous Article

Divorce Attorney Consultation Questions

Next Article

DIY Auto Interior Detailing

DIY Air Conditioning and Refrigeration Troubleshooting

Air conditioner and refrigeration systems can seem complex. So when that equipment is not working properly, your first instinct is to call a technician. While many break-downs are best solved by an air-conditioning technician, it pays to know how to troubleshoot the system before picking up the phone and calling for help.

Regardless of how complicated your system is, there are a few basics that apply almost universally. A methodical approach might help you solve the problem yourself.



  1. Does the system turn on?– If the answer is no, check to see if the power source is the issue.  Is the system connected to the power source?  Is a breaker tripped? Does the thermostat use batteries? If your batteries are dead your system may not work. Does the system have an on/off switch that has been turned off? Many systems have both an inside and an outside switch.  Make sure you check both. If this does not work, check the fan motor. It could be burned out, have a short or a broken wire from the thermostat.

  2. Does the system get cool? If the answer is no, check to see if the thermostat is working properly. You can check for proper thermostat calibration by using a thermometer. If the thermostat is off, it may be that the thermostat is not level or that the inside of the thermostat is dirty. If the thermostat checks out, check the condenser. Make sure that the condenser is free of debris inside and out. Also, check the level of refrigerant in the system. If the system is low on refrigerant, temperature will be affected. Another item that affects cooling is the filter. If the filter is clogged with dirt and debris, this could affect cooling.

  3. Is there an unusual noise?- Sometimes, your unit is running fine but you hear a consistent noise when the system kicks on. Check the condenser to make sure that debris has not fallen into the system, and is rattling around. If there is no debris, it is possible that the fan blades are loose. Check the screws connecting the fans to ensure that they are tight. If not, tighten them with a screwdriver. If you still hear a noise, you may have an internal malfunction or a problem with your duct work. Most duct work is metal. Forced air could be rattling a duct run that is not properly secured.


While this is not an exhaustive list, these simple troubleshooting tips can save you money. All it requires is taking a proactive approach, before calling for help.