DIY Dent Repair

Removing dents can be accomplished by using various methods. The method that you use may be dependent upon the size or location of the dent. Dent removal can seem difficult, but you can get the job done. Refinishing and painting are also required to completely repair a dent.

By Hand

It is common for car dents to occur in parking lots where cars are parked in narrow spaces. This type of dent can be easy to repair, depending on the vehicle. You can determine if you can fix the dent by hand if you can press on the edges of the dent, pushing it back into place.

Cars that are made of recycled materials are easy to fix. If there is a large hole, it would be easier to replace it rather than repairing it. Inside door panels can be removed if you need to reach the backside of a dent. The backside of the dent can be revealed by popping the hood or trunk.

With a Kit

Small car dents are easy to fix by using removal kit from the auto supply store. The kit includes suction cups that are to be placed over the center of the dent, pulling the suction cup’s string should repair the dent. If the dent does not pop back into place you may need to use bigger tools to fix.

Hardcore

Drill a 1/8-inch hold in the center of the dent and thread a dent-pulling tool for the repair kit and insert it into the hole. Tug the dent-pulling tool in order to pull the dent outward. If the dent forms a bubble after pulling on it, hammer it flat with a hammer. Remove the paint from the dented area by using a round sander tool. Once the dent is completely removed, fill the area with auto body filler. You can purchase auto body filler at any auto supply store. Use sandpaper to smooth out the body filler. Spray auto-primer over the sanded area and allow drying before applying more. The sandpaper grit should be 600. Apply paint over the sanded area once the surface is sanded perfectly smooth.