DIY Drain Repair
Bathtub drains can get clogged frequently due to hair, soap, and shampoo. You might also find that you need to replace your drains for optimal performance. Clogged bath drains can usually be cleared by removing the drain cover and using a plumbing auger. Should you see any serious problems, you can then contact a plumber.
Foot Lock or Roller Ball Drain Repair
- Find the problem and purchase the proper drain assembly.
- Rotate the drain counter-clockwise. Keep rotating until you are able to pull it out.
- Replace with new drain.
Lift and Turn Drain Repair
- Purchase the assembly. If you need help, talk a home improvement associate.
- Remove the setscrew underneath the lip of the plug.
- Check for drain clogs, and clear out any before proceeding.
- Check the rubber seal for damage. Replace if necessary.
- Put the setscrew in place.
Clogged Drain Repair
- Attempt to plunge for five minutes.
- If the drain is still clogged, remove the drain cover.
- Using a snake, insert into the drain cover area and push the snake in until you feel the blockage.
- Following the instructions on your snake, use until you feel the clog break. You can also periodically pull the snake out and clean any hair off the tip.
- Once you feel the clog break, run hot water into the drain to make sure it drains freely.
- Replace the drain cover.
- If the clog is still not coming loose, purchase a chemical drain cleaner. It's best to let this sit overnight, although you can rinse in as little as 15 minutes.