DIY Window Replacements
Updating your windows is a great way to save money on your heating costs. Today's windows are also much more easy to clean and operate. This is also a job that you can do yourself without the need of hiring a contractor.
Window Measurements
You need to have precise measurements in order for the replacement windows to fit properly. The most accurate way to achieve this is to calculate the measurement from the inside of the house. When measuring the width, go from the left to the right side of the frame. When you measure the height, begin toward the top of the frame and go to the bottom.
Removal of Existing Windows
The great thing about replacement windows is that they are made to fit into the existing frame. The only thing that needs to be done is to take out the old window. If you have a double hung window then you need to remove both the top and bottom windows. Take out the wooden frame and set it aside. Extreme care needs to be taken when doing this. Do not damage the frame because it will be used again with the replacement windows.
Replacement Windows
You need to have precise measurements in order for the replacement windows to fit properly. The most accurate way to achieve this is to calculate the measurement from the inside of the house. When measuring the width, go from the left to the right side of the frame. When you measure the height, begin toward the top of the frame and go to the bottom. Before installing the replacement windows, you want to make sure to caulk the inside of the outer frame. Next, put the window stops in the middle of the frame until the mounting holes are visible. You should see two holes on the top and two on the bottom. Set the window inside that opening and mount with screws. Check the installation and make sure that all levers are working properly. Open and close the window to make sure that this can be done easily. If there is resistance, this means that the screws are too tight and need to be loosened.