Different Stock Lumber Sizes
Building projects require accurate measurements. This requires knowledge of the exact dimensions of the materials used. Building lumber has two size references. The first is the nominal, which refers to the lumber before it is cut and dressed at the mill. The second is the dimensional, which refers to the lumber after it has been dressed and cut and is ready to leave the mill.
Nominal Lumber
Lumber that is described as a two-by-four is actually 2-inches thick and 4-inches wide. This lumber has not been finished. Sometimes called rough lumber, it is simply a log that has been sawed off. It is green and wet and has high moisture content. The starting point for lumber is the nominal size regardless of the wood type. This number is used as a reference size.
Dimensional Lumber
The lumber is dressed or finished and cut. At this point a two-by-four is actually 1 ½ inches by 2 ½ inches. The lumber has been passed through the smoothing process to create the finished product. The lumber is dried to average moisture content of 15 percent.
Actual Dimensions
- To get the actual dimensions of lumber that is 1-inch thick and between two and eight inches wide, you need to subtract a quarter-inch from the thickness and a half an inch from its width.
- For lumber that is 2-inches thick and between two and eight inches wide, subtract half an inch from the thickness and the width to get the actual dimensions.
- The American Lumber Standard committee publishes a reference guide called The Voluntary Product Standard PS 20-10. It acts as a guide for lumber dimensions and grades. Most lumber used in construction is from pine trees, which are softwood. Hardwoods like oak are measured by board feet and are sold in different dimensions.