Do It Yourself Patio Fountains
Soften the look and feel of your patio by adding a water fountain. Creativity is the primary skill needed when working your do-it-yourself patio fountain project. Patio fountains can be small enough to sit on a table or large enough to act as a primary feature for your patio decor.
Things You Need:
- Plastic, ceramic or metal container (watertight)
- Stones or pavers
- Water Pump
- Plastic Tubes
- Ensure that the water basin should is made out of a watertight container for your fountain. You can do this by filling the container with water and checking for leaks.
- Place the watertight container on a level surface in the spot of your choice, preferably one where you can view and listen to the fountain once it is completed. The elements will hinder the functioning of the fountain. The wind can redirect water from the fountain and the sun will cause the water to evaporate.
- The water pump should be rated for outdoor use. The size of the pump depends on the size of the container and the amount of water it holds. The pump should have a gallon per hour rating (GPH). Ideally, the pump will need to circulate water once an hour.
- Fill the container with water and place the pump upright. Connect the tubing to the outlet located on the pump. The maker of the pump will include their own recommendations for the tubing size. The length of the tube will be determined upon the length needed to go to and from the pump to inches above the water in the container.
- Plug in the pump, turn it on and adjust the height of the spray, if needed. Unplug the water pump and decorate the pump to your liking. Add stones to the bottom of the container to add a support system to the tubes. Add your fountain decoration near and over the tubing, ensuring that the tubing is well hidden.
- Plug in your water pump and enjoy.