Homemade Small Bait Fish Traps
Making homemade small bait fish traps is an excellent way to save money in today's tough economy. Buying a fish trap from a department store or sporting goods shop can be expensive and fish traps are sometimes hard to locate. A fish trap can be made at home with a few very simple items.
Tools Needed:
- Empty two liter bottle of pop
- Tape measurer
- Razor blade
- Rope
- Marker
- Locate a two liter bottle of pop. Rinse the bottle out with water so that it is clean. Do not lose the cap.
- Measure three inches from the top of the two liter bottle using the tape measurer.
- Mark the spot with a marker.
- Cut around the bottle on that area using a razor blade to remove the top portion of the bottle.
- Measure one inch from the bottom of the two liter bottle using the tape measurer.
- Mark the spot with a marker.
- Use the razor blade to cut a hole big enough so that the rope will fit inside of the bottle.
- Rotate the two liter bottle and cut another hole the same size as the previous hole and place the other end of the rope inside of this hole.
- Tie the two ends of the rope together at the top of the two liter bottle. There should be some slack so that the rope can serve as a handle.
- Replace the top of the two liter bottle that was removed and connect it back to the bottom of the bottle using a waterproof tape. Apply a good bit of tape so that the top will not disconnect itself.