Previous Article

How To Care for Tanning Bed Burns

Next Article

How To Change Bulbs in a Tanning Bed

How To Change Acrylics in a Tanning Bed

Acrylics are a critical part of any tanning bed experience.  The acrylics sit over the tanning bulbs and create a comfortable surface for the client to lay on.  Periodically, the acrylics need to be changed so that the tanning bed can operate at optimal efficiency.

Tanning bed acrylics are the plastic coating that sits over the tanning bed bulbs.  The acrylics make it comfortable for the person laying in the tanning bed.  Over time, acrylics deteriorate, and must be replaced.  Several factors weigh into how often the acrylics need to be replaced such as the types of lotions used by clients, as well as the size and weight of those clients.  When the acrylics do need to be replaced, a few simple steps can ensure that the process is a smooth one.



  1. Take a good look at the tanning bed and locate the hinged profile of the bed.  Notice the profiles that run the entire length of the tanning bed in the front and in the back.  The purpose of the profile is to hold the acrylic shielding in place.  The profiles will have to be removed in order to remove the acrylics.

  2. Pull up the inside edge of the first profile by pulling at it carefully from the middle until a click indicates that the latch is released.  Once the entire length of the profile is pried away from the acrylics, it will swing back freely.  As the profile is released, use caution because the acrylic edges may be sharp.

  3. Repeat the first two steps systematically, until all of the remaining profiles are removed.

  4. Grab the long edge of the exposed acrylic while standing in front of the tanning bed.  The acrylic should slide right off the tanning bed until it has been completely removed.

  5. Prepare the new acrylic shields for installation.  Line up the profile and the new acrylic shield, and carefully slide it into place.

  6. Push the hinge of the newly installed profile back into its place in the tanning bed.  It should snap tight and the tanning bed should close completely.

  7. Enjoy your tanning bed’s fresh new acrylic!