How To Change Oil in an ATV
If you are the owner of an ATV it is imperative to keep up the maintenance to keep it in proper working condition. One of the most important things you should do is to change the oil, which is something you can do yourself in a matter of minutes. It is recommended that you refer to your owner's manual to determine when the oil should be changed.
How to Change Oil in an ATV
- Park the ATV on a level surface and make sure you have enough space around it to work.
- Turn the ignition on and let it run for approximately five minutes. The oil needs to be warm when you change it and this should be enough time for it to warm up.
- Remove the panels that are blocking the access to the oil fill cap.
- Locate the drain plug, which is located underneath the ATV.
- Place a drain pan directly underneath the drain plug to catch the oil.
- Pull the drain plug and let the oil run into the pan.
- Replace the drain plug after the oil has completely drained out.
- Dispose of the used oil in the pan. The safest way to dispose of it would be to take it to a recycling center.
- Place a funnel in the oil fill hole of the ATV.
- Refer to the owner's manual to determine how much and what type of oil to use.
- Fill with oil and and start the engine and allow it to idle for a couple of minutes. You should also check for any leakes while it is idling.
- Turn off the engine and allow it to set for approximately 5 minutes.
- Insert the dipstick into the oil filter hole and remove it to check the level of the oil. Make sure the dipstick is showing full.
- Replace the oil cap and reattach the panels.