Previous Article

How to Clean a Fish Tank

Next Article

How to Clean a Frigidaire Dishwasher Filter

How To Clean a Foam Air Filter

Many car owners use foam air filters in their car system. This type of filter is designed so that the oil in them will catch dirt or debris that may harm the engine. The oil in the filters is what filters the air and not the foam itself. You must always oil foam filters properly so they can work efficiently on your vehicle.

How to Clean a Foam Air Filter


Materials Needed



  • Bucket

  • Hot water

  • Liquid dish soap

  • Plastic bag

  • Motor oil



  1. Remove the plastic frame that houses the foam air filter. It is usually secured with clips. Open it and remove the foam air filter.

  2. Fill a bucket with 1 gallon of hot water. Add in 3 drops of liquid dish soap. Mix the solution well.

  3. Submerge the foam filter into the solution. Allow the air filter to soak for 30 minutes.

  4. Remove the filter from the solution and wring it. Rinse the foam air filter with clean water to remove all traces of detergent from it and wring it.

  5. Pour a small amount of motor oil into a plastic bag. Use a resealable plastic bag so you can use the oil the next time you clean the filter. Place the air filter in the bag. Wring the bag to get the oil into the air filter.

  6. Remove the filter from the bag and wring the excess oil from it. You do not want to place the air filter with too much oil because it can restrict the flow of air.

  7. Replace the air filter back into the plastic frame and secure it with the clips.