How To Cut Shells for Jewelry
Sea shells are beautiful and make attractive jewelery. You can make earrings, bracelets, brooches, or necklaces using sea shells. Shells are used often in jewelery making because of their unique coloring and design. There are a few safety precautions to follow when working with shells to protect from possible injury.
- Attach a tungsten carbide cutter bit to a Dremel drill. The tungsten carbide bit is available for purchase online or at your local arts and craft store for under $10.
- Put on your safety goggles and mask to protect from the dust released from the shell.
- Place the drill tip in water carefully before using on the shell. Do not submerge the entire drill in the water because it will get damaged.
- Cover the shell with duct tape and place it on a flat working surface.
- Turn the drill on and begin to cut the outer edges of the shell to the desired shape. Use the drill slowly when cutting a shell because increased pressure can break the shell.
- Dip the bit back in the water several times during the cutting process to reduce the heat of the tip.
- When you have reached the desired shape, drill the hole in the shell that will attach to the jewelery.
- Turn the shell over to confirm that the drill created the hole through the entire shell.
- Remove the duct tape from the shell and rinse with clear water to remove any tape residue or dust from the shell.