How To Detect Inground Swimming Pool Leaks
You may have a leak in your underground swimming pool if the water level appears to lower at a faster rate than normal. Extreme temperatures, shifting soil and wear can cause leaks in a pool. Tears may be easy to see near the surface, but small holes beneath the surface are harder to spot. Learn to detect inground swimming pool leaks as part of routine maintenance.
Materials:
- Bucket
- Waterproof tape
- Dropper
- Food coloring
- Inspect the inside edges of the inground pool liner for obvious tears. Check if the liner has pulled away from the track in a vinyl-lined pool. Look for cracks or splitting tiles in a concrete pool.
- Conduct a bucket test to determine if you have a leak. Fill a bucket with water and place it on the first step inside the pool. Mark the level of the pool water on the outside. Mark the water level inside the bucket. Turn off the pool filter for 24 hours, then compare water levels. You have a leak if the pool water is 1-inch lower than the water inside of the bucket. To be sure, turn on the filter for 24 hours and check the levels again. If the pool only loses water when the filter is running, you likely have a plumbing leak.
- Examine the pool filter, fittings and pump for excessive moisture or dripping water. Tighten each piece with a hose clamp to rule out which piece is leaking.
- Fill a dropper with food coloring and release it in the pool. The colored dye will drift toward the leak and escape through the hole. In some cases the dye will stain the hole and make it more detectable.
- Contact a pool technician who specializes in inground pools to repair a leak in the liner or problems with the plumbing.