How To Fix the Jets on a Portable Spa
If the jests on your portable hot tub or spa unit are not functioning properly, the odds are that they have become clogged over time and will need to be cleaned. You can easily clean the jets in your portable spa unit and restore them to their original working order. All you need is a little time and a couple of simple ingredients to fix your home spa jets in no time.
- Mix together a small amount of vinegar and baking soda until the two combine together to form a paste that is the same consistency of toothpaste.
- Use an old toothbrush to clean as far inside of the jets as you can with this cleaning paste. Allow the paste to gunk up inside of the jets and push it back into the jets as far as possible.
- Remove any dirt and debris that you can see, and then allow the paste to sit on the jets for a few minutes to allow the cleaning action to break up the dirt and debris.
- Hook up your portable spa as you usually would and allow the water to fill to a level that is above the level of the jets on your portable spa.
- Add one cup of vinegar to the bathtub, and turn on the jets to your portable spa. Allow them to run for a while letting the baking soda and vinegar work together at unclogging your jets.
- Allow them to sit in the tub submerged in the vinegar water, and then turn them on to see if they are working. If they are working you should refill the tub with clean water and allow it to run for a few minutes to rinse the mechanisms in the jets where you applied the baking soda paste.
- If the jets on your spa are still not working you may need to repeat the process increasing the amount of vinegar that you add to the water from one cup to two cups. You can also use a toothpick or Q-tip to apply the baking soda paste into the jets to remove any stubborn stuck on dirt and debris.
- Once your jets are working properly, refill your tub with clean water, and allow them to run for a few minutes so that all of the baking soda paste is thoroughly removed and washed out of your jets.