How To Install Towing Chains
Tow chains are a quick way to connect and object to a towing vehicle safely. The tow chains have an ability to pull up to 4700lbs. Tow chains range in different sizes and prices depending on what job you need the chains for. It is one of the more efficient ways to safely tow a vehicle to your destination.
Breaking down is an unfortunate occasion and can happen to anyone, towing charges are very costly but if you have someone with a truck and a pair of towing chains you can get your vehicle to its designated destination without worrying to much about a towing charge.
- Connect the "J-Hook" end of the tow chain to the ball joint or hitch of the towing vehicle. If the vehicle does not have a ball joint you will need to wrap the chain under the center of the rear axle
- Attach the other side of the towing chains to the car that is being towed. You will need to loop it around the center of the front axle. You will then need to hook the end of the chain over the first set of chain links.
- Get into the towing vehicle and drive forward slowly so the chain becomes tight. When the chain has tightened you need to get out of the towing vehicle and make sure both ends of the chain is still attached to each vehicle.
- Get in the vehicle that is being towed and place the car in neutral. If this step isn't completed the vehicle will lock and it will cause damage to it.
- Ask someone to get in the towing vehicle while it is being towed just in case if there is a problem that person can honk at the towing vehicle to caution them that a problem has occurred and will need to be taken care of.
Please remember you never want the chain to drag across the road so make sure that you keep the chain snug. Please turn on the hazard lights on the vehicle being towed. Towing a vehicle can be a dangerous job so please use caution while doing so.