Previous Article

How to Mosaic a Sink

Next Article

How to Mount a Fire Extinguisher

How To Mount a Car Tire

Mounting a tire on a rim is one of those procedures that should be left to professionals with the proper equipment because of the danger. When the tire is inflated it will deform twice under pressure to mate itself to the rim, once for each rim, and when it does the tire and rim can jump around with bone shattering force. When you must mount your tire yourself, carefully follow the proper steps.

Mounting a tire manually is a procedure for emergencies only. Improper use of a pry bar on malleable metal or rubber can prevent a seal and make the tire useless. Lack of care when the bead seats can lead to serious injury to mechanics or bystanders.



  1. Remove the wheel from any vehicle to which it may be attached.

  2. Remove any tire that may be mounted on the rim.

  3. Clean the rim to insure a good seal with the new tire.

  4. Place the rim flat on level ground. Stand the tire on its tread beside the rim, and position yourself behind it.

  5. Apply a little penetrating oil to the bead area of the tire. If no oil is to be had, a bit of dish soap or even plain water can be a help.

  6. Roll the tire down so that its hole is aligned with the rim. Place your knees against the top of the tire and work the bottom half of the tire down over the rim. If necessary, work at the bead with a screwdriver or pry bar to get the bottom half on. Be careful with the pry bar, though, since scarring either the rim or the tire will make it useless.

  7. Use your hands or the pry bar to work the top half of the tire down on the wheel. Again, be careful not to damage the tire or the rim.

  8. Secure the tire to something steady. If you put it back on the car, let the car down on the tire before inflation, since the force of the bead seating can knock the vehicle off the jack.

  9. Inflate the tire until the beads seat, being careful not to get hit.

  10. Continue the inflation to manufacturer’s specifications.

  11. Watch the tire carefully for 24 hours to make sure it holds air.