How To Prep a Car For Paint
If you want a paint job that looks great, you should start the painting process by preparing the car for the paint. The biggest part of the paint task is prepping the car while the smallest part is actually painting the car. Many people will save themselves money by prepping the car before taking it to a professional paint shop.
How to Prep a Car For Paint
Materials Needed
- Mask
- Car cleaner
- Water
- 600 grit sandpaper
- 800 grit sandpaper
- 1000 grit sandpaper
- Sanding block
- Primer
- Guide coat
- Cleaning solvent
- Finishing primer
- Primer sealer
- Park the car in an area that is well ventilated. You should wear a mask when for the steps that come after cleaning the car.
- Wash the car with a car cleaner and water. Allow the car to dry for several hours. Remove all of the trim, emblems, antennas and door handles from the car.
- Sand the entire car with 600 grit sandpaper. Change to 800 grit sandpaper and sand the car again. The last sandpaper to use to sand the car is 1000 grit sandpaper.
- Apply three coats of primer over the car after it has been sanded. Apply 600 grit sandpaper over a sanding block and sand the car. The sanding block will make the surface smooth and even. Apply a coat of guide coat to the car.
- Use a clean cloth to apply cleaning solvent to the car. Spray a coat of finishing primer over the entire car.
- Apply 800 grit sandpaper to a sanding block and go over the finishing primer. Use light strokes as you sand with gentle pressure.
- Go over the surface of the car with two coats of primer sealer .The sealer will protect all of the products you placed on the car and get it ready for the new coat of paint.