How To Remove Automobile Window Tint
If you have noticed the tint on your car windows bubbling up or peeling it more than likely needs to be removed. After the appearance of the first bubble usually several more will appear shortly thereafter. You should not attempt to remove the tint by just pulling it off because it will not work as intended.
How to Remove Automobile Window Tint
- Cut two garbage bags out in the shape of the window.
- Make a mixture of soapy water and in a spray bottle and spray the solution on the outside of the window.
- Place one of the trash bags you just cut on the window and use your hands to smooth the plastic out flat.
- Spread out a tarp on the inside surfaces near the windows. Be sure to cover your speakers, upholstery and rear lights.
- Spray the inside of the window with undiluted ammonia. Be sure to wear a facemask because the ammonia will have a strong smell.
- Place another trash bag on top of the ammonia to trap it against the window.
- Park the car in the sun for approximately an hour. It is recommended that the rear window be facing the sun. The heat will be absorbed by the garbage bags, which will soften the adhesive on the tint.
- Use a razor to lift the tint off starting at the corner of the window.
- Continue spraying ammonia on the tint to keep it moist and you should be able to take it off in one piece.
- Use the razor blade to scrape off any tint that you were unable to pull off.
- Use the ammonia to remove any adhesive remaining on the window.
- Remove the trash bag on the outside of the window and use glass cleaner to clean the window.