Previous Article

How to Repair a Rear Main Seal on a Truck

Next Article

How to Repair a Rust Hole in an Auto

How To Repair A Rip In A Leather Seat

There is nothing more unattractive than a tear in expensive car upholstery. Getting leather seats repaired by a professional can be very costly. Luckily with a few tools and products, you can repair the car's upholstery without having to spend a great deal of money on those rips that can often occur on leather car seats. 

Items needed:



  • 240-grit sandpaper

  • Mild liquid soap

  • Water

  • Leather patch

  • Leather glue

  • Upholstery conditioner

  • Dry cloth

  • Leather patches

  • Leather compund

  • Protective coating

  • Warming gun (optional)



Instructions:



  1. Clean the car seats with mild soap in water. Cleaning the seats helps remove any dirt and debris.

  2. Sand the seats with 240-grit sandpaper. The purpose of sanding the seat is to help the product used for repairing the ripped leather upholstery (compound) to adhere better.

  3. Patch the area underneath and on top of the ripped seat. Cut a patch that is about the same size of the rip and place it underneath the surface. Then place a patch with a slightly larger diameter over the rip, tucking on the edges inside.

  4. Cover the patches with leather glue and allow them to completely dry. Use low heat leather compound if the glue does not stick to the patch. Use a warming gun to apply the patch.

  5. Take a dry cloth and rubbing alcohol and wipe over the patched area after the glue has dried. This helps to remove any lumpy areas. Add the protective coating.

  6. Apply a conditioner to the leather seats after everything has dried.