Previous Article

How to Test for Nitrates in Drinking Water

Next Article

How to Test Moisture in Hardwood

How To Test Gold Jewelry

Gold is one of the most precious metals used in making jewelry. However, if your piece has no markings indicating its gold content, it can leave you wondering if it really is gold, or an imposter. Therefore, the item must be tested to determine its authenticity, or just another base metal with gold plating. One of the best methods for testing is the acid test.

Acids can be used to test the authenticity of gold. The verification process involves observing the chemical reaction that occurs once the jewelry has been acid treated.

General Acid Drop Test



  1. Start by placing a drop of the gold testing acid on the piece of jewelry you are verifying. 

  2. Observe the reaction. If there is a green color bubbling up, the item has little to no gold content.



Acid Test for 10K, 12K and 14K Jewelry



  1. Rub or scratch surface of the jewelry piece onto the top of the testing stone. The stone should have a mark of at least one to one and one half inch length from the piece being tested.

  2. Put a scratch line from a gold test needle next to the line you made with the jewelry you are testing.

  3. Drop acid slowly on to the lines. 

  4. Compare the scratches to see which scratches dissolve.



  • If the jewelry scratch dissolves quicker than the test scratch from the needle, then the amount of gold in the jewelry is lower than that of the test needle.

  • If they dissolve at the same rate, then the test piece is equivalent to the test needle in gold content.

  • If the needle mark fades quicker than the mark from the jewelry, then the jewelry is a higher gold content than the test needle.


Always clean your stone with water after each testing. Gold jewelry which contains 10K, 12K and 14K can be tested with this method.

Gold Scratch Acid Test for 18K Jewelry



  1. Scratch the surface of the jewelry on the rock.

  2. Repeat the process with the needle. Add the drop of acid formulated for 18K gold. 

  3. Any gold that is less than 18K will fade within 30 seconds. However, if the gold remains on the stone it is 18K or higher in content.



Scratch Acid Test for 20K and 24K



  1. Scratch the gold item on the stone.

  2. Repeat the process with the needle.

  3. Apply a drop of acid specially formulated for 22k or platinum to the mark.

  4. The first mark to disappear has the lower gold content.