How to Access Comcast Cable Modem Settings
When you set up a Comcast cable modem, typically it works fine with the default settings. If you are having a problem or just want to change the settings, you can do so by accessing the cable modem settings through your Internet browser. You can learn how to access Comcast cable modem settings in a few short steps.
Supplies
- Comcast cable modem
- Ethernet cable
- Make sure the Comcast cable modem is connected to your computer properly. Connect the coaxial cable to the “In” port on the back of the Comcast cable modem.
- Find the MAC address of the Comcast cable modem. You may find this on a sticker on the bottom of the modem. It will start with “http”. Write down the entire address. If it is not on your modem, look in your documentation that came with your modem or you can call Comcast technical support.
- Open an Internet browser, such as Internet Explorer or Firefox, on your computer. Connect an Ethernet cable into the “Out” port on the cable modem. Insert the other end of the Ethernet cable into the “WAN” port located on the back of your computer.
- Connect the cable modem power cable to the modem, and then plug it into a power source. Turn the cable modem on.
- Type the MAC address into the address bar of your browser that is open on your computer and press “Enter.” The cable modem settings will display on your screen. Make the changes that you want and click “Save” at the bottom of the screen. Close your browser when you are finished.