How to Add Motor Oil to a Car Engine
The engine of a car needs to be properly maintained in order for it to be classified in good shape. It is highly recommended that you check the level of the oil on a regular basis because a low oil level could cause serious damage to the engine.
The oil level in your engine should be checked on a regular basis. Whenever the oil level is showing below the minimum mark on the dipstick it is of the utmost importance that oil is immediately added. Adding oil to an engine is a very simple process and it is something you can easily do by following a few quick and easy steps.
- Purchase the proper type of oil that is recommended for your car. If you are not sure of what type of oil to use refer to your owner's manual.
- Lift the hood and look for the oil filler cap on the engine. It is located on top of the engine and it will have a picture of a water can on it.
- Pull out the oil dipstick to determine how much oil is needed.
- Remove the cap and lay it off to the side. Make sure to place it where it will not get lost.
- Use a funnel and pour the motor oil into the engine. It should be poured in one quart at a time.
- Turn on the engine of the car and allow it to run for a couple of minutes.
- Turn the engine off and pull the dipstick and check the oil level.
- Pour in some more oil if it is still showing as low on the dipstick.
- Replace the oil cap.