How to Adjust Freightliner Headlights
The headlights on a Freightliner truck are easily adjusted by using a vertical adjustment screw. The lateral position of the headlights is typically fixed, the headlights on the truck need to shine at least 20 feet in front of you. Since the truck is so high off of the ground, they naturally shine into the air rather than in front of the truck.
- Park the
Freightliner truck facing a wall. Make sure that the headlights are
about 25 feet away from the wall, facing it. The best wall is the
side of a concrete building or brick wall. You do not want a wall
that has a lot of writing or anything impeding the light's
reflection onto the wall. - Turn the
headlights on and open the hood of the Freightliner truck. Locate
the backside of the headlight(s). You will need a ladder to see into
the hood, and to find the backside of the light. - Look on the
backside of the headlight housing, where there is usually a black or
white plastic adjustment screw. This is the only screw that you will need to locate to adjust the headlight. - Turn the
adjustment screw with a Torque head screwdriver or a cross-point
screwdriver. The type of screwdriver will be dependent on the make
or model of the Freightliner truck you drive. Turn the adjustment
screw on the back of the housing until the headlight beam shines
toward the bottom of the wall. The truck's headlight beam should
touch the bottom of the wall, where the wall and the ground join.
Remember, this should occur at a distance of 25 feet.