How to Assemble a FloorMate

FloorMate by Hoover is an upright wet/dry vacuum. FloorMate is a reasonably priced cleaning tool priced under $150. The FloorMate offers the ability to clean carpeting, wood floors, or tile with ease. This Hoover FloorMate model is lightweight and durable and received good reviews from owners. The assembly of the FloorMate is simple to complete.  

1. You will need a Phillips head screwdriver and the instructions manual to complete the assembly of the FloorMate. If you have misplaced the user's manual, you can download a copy through the Hoover website.   


2. Remove the FloorMate from the box placing all contents around your work area.  


3. Take the handle and attach to the base placing the screw of the base to the back. Make sure the cord hook is facing toward the back. 


4. Remove the clean solution tank by pressing the knob and pull the tank toward you.  


5. Attach the screw and washer with a Phillips head screwdriver. Do not over tighten the screws.  


6. Place the two screws on the back side of the handle and tighten with the Phillips head screwdriver.    


7. Push the brush control switch down until you hear a click. This attaches the switch rod to the base. 


8. Replace the clean solution tank until it clicks. 


9. Lay the unit down and attach the brushes. Tilt the brush attachment aligning the “D” and “E” post accordingly. Turn the brushes slightly until it is secure.  


10. Install the nozzle with the “F” latches to the outside. The “H” side is facing the FloorMate. 


11. Hold the nozzle in place and press the latches on each side. Gently push the nozzle in until it is past the latches.