How to Brew Beer in a Secondary Fermenter
If you brew beer in your home, you should consider learning how to brew your beer in a secondary fermenter. It is a process that involves siphoning the beer from the primary fermenter to a secondary fermenter by using a hose. By doing this the beer will be more flavorful because the yeast is separated from the yeast sediment in the primary fermenter.
How to Brew Beer in a Secondary Fermenter
1. Place a drinking straw against one end of a siphon hose and allow the straw's length to extend past the end of the hose.
2. Wrap a piece of tape tightly around the straw and hose.
3. Place the primary fermenting container on the kitchen counter or table and place a 5-gallon jug on the floor below the container.
4. Insert the end of the hose with the straw in the ferment container. The tip of the straw should touch the bottom of the container and the hose should be approximately 4" from the bottom of the container.
5. Hold the end of the hose in your hand with the tip of the hose between your ring and little finger and your palm. Form a tube with your hand by closing your fingers.
6. Place your mouth against your hand and draw air from the tube as if you were sucking on a straw.
7. Immediately insert the hose into the 5-gallon jug when the beer begins to flow down the tube.
8. Siphon all the beer from the primary fermenter to the jug. Make sure the siphon hose remains above the bottom of the fermenting container to keep sediment from entering the hose.
9. After all the beer is transferred to the secondry fermenter, seal the container and leave in a cool, dark location for approximately 2 weeks.