Previous Article

How to Attract Garden Gnomes to Your Garden

Next Article

How to Buy Garden Gnomes

How to Build Garden Gnomes

Building your own garden gnome can be fun. You can add your own decoration or flare to your garden that no one can re-create. Garden gnomes do take a little time and patience to make; however, the work will be worth it in the end.

Items Needed:



  • Polymer clay

  • Plastic covered board

  • PVC pipe

  • Instant glue

  • Pourable liquid latex

  • Sharp knife

  • Spray vegetable oil

  • Cheesecloth

  • Duct tape

  • Cement

  • Play sand

  • Plastic tub

  • Mixing stick

  • Paints


 



  1. Use clay to make the garden gnome. This will act as the model for the mold. Or purchase a garden gnome for the model.

  2. Use instant glue to secure the gnome to the plastic covered board.

  3. Cut the PVC pipe so it is 3 inches taller than the gnome.

  4. Use vegetable oil spray on the inside of the pipe and garden gnome model.

  5. Put the pipe over the gnome, there should be ¼-inch of room between the pipe and the gnome.

  6. Put modeling clay on the bottom of the pipe to seal the pipe and board together.

  7. Stir the latex and pour it into the pipe and let it cure overnight.

  8. Take off the clay from the bottom of the pipe and remove the pipe off of the mold and take off the plastic bottom.

  9. Use a knife to cut the mold in half.

  10. To cast a gnome, use the vegetable spray inside the mold.

  11. Put the two pieces together so they match up and wrap up the outside with cheesecloth and duct tape it together.

  12. Make the cement following the directions and pour it into the molds and let it sit overnight.

  13. Remove the tape and cheesecloth and separate the two pieces and take out the garden gnome.

  14. Decorate and paint as wanted.