How to Build Your Own Computer Parts
Building a custom computer has many benefits, including having a specific design that meets the needs of the user and cost effectiveness. Upgrading is also made much easier since all of the unit's components would already be known. This is a rather detailed, yet doable project for the motivated computer lover.
- Choose the motherboard type. The type of motherboard chosen will depend on what the system will be used for and the budget. Inexpensive motherboards can be purchased for $50, but if the goal is to create a system that will be used for gaming or streaming video, then a high-end motherboard will be needed. The price for these are between $100-$200.
- Choose the number of USB ports needed. Keep in mind the type of motherboard that was selected and make sure that it can handle multiple ports.
- Ground yourself before starting the building process. This is very important when beginning to build the computer. If static passes through your body onto the Central Processing Unit, or CPU chip, then it will be ruined and a new one will need to purchased. You can ground yourself by wearing a grounding bracelet. Make sure the bracelet is connected to a copper pipe.
- Line up the motherboard and microprocessor chip. These should fall right into place with no added pressure needed.
- Install the heat sink. Follow the directions that were included with the Central Processing Unit for this step.
- Install the RAM. This is random access memory and it needs to be installed in the motherboard slot that is marked "1". Firm pressure will need to be applied to lock the RAM in place. Install the power supply and face plate to hold the mother board in place.
- Connect the motherboard to the casing. Line up the holes from the motherboard with the pre-drilled holes from the casing and secure them with screws. Attach the power leads to the motherboard. There will be two of these: one large and one small.
- Install the hard drive. Line up the four rubber grommets from the brackets in the case to the four holes on the hard drive and secure with screws.
- Install the cables. The cable that has a red stripe on it and is marked "1" goes into the integrated drive electronic connector that is also marked "1". Install the rest of the cables by matching up the corresponding numbers to the IDE connector.
- Install the CD-ROM drive. Make sure to set the jumpers correctly. The drive fits in front of the case and needs to be screwed into the face plate.
- Install a video card if preferred. Insert it into the slot on the motherboard that is marked "AGP."
- Close the case. It is now time to add the monitor, keyboard, mouse and speakers and test the computer.
- Turn on the power switch. If the system was set up correctly, then both the fans and hard disk will start to spin and the case will light up. The monitor will then display whichever operating system was installed.