Previous Article

How To Build a Car Tire Bead Breaker

Next Article

How to Build a Chain Link Fence

How to Build a Cattle Fence

When you make the decision to raise cattle, you must prepare your property to secure your cattle. The first step is to construct a cattle fence, in order to keep your cattle in your pasture. A basic cattle fence design is simple to construct. By constructing this cattle fence yourself, you will save money to use for cattle supplies or feed.

How to Build a Cattle Fence:



Step 1: Set your parameter for your cattle fence. Measure out the area where you will install the fence in increments of six feet. Every six feet drive a stake in the ground. These stakes are the location for your fence posts. Measure the distance between the posts where you will install your gates.



Step 2: Dig a hole three feet deep for each fence post location.



Step 3: Mix quick dry concrete for the fence post holes. Install your fence posts into the holes. Pour enough quick dry concrete to fill the hole all the way around the fence posts. Repeat this step for all fence posts.



Step 4: Allow the concrete to dry for at least 24 hours to properly set.



Step 5: Attach the mesh fencing to the first post with nails. Alternate the way in which you bend the nails as you attach the mess fencing to the fence post. Repeat this step until the mesh fencing is completely installed.



Step 6: Drill the holes for your gate hinges into the fence post. Install the gate hinges onto the fence gate. Connect the fence gate to the fence post. Install your two-way fence lock per the manufacturer's instructions.