How to Build a Computer for Music
Building a computer for music is like building any other computer, initially. Where a computer that is built for music differs is that it is tuned for digital audio. This means taking care of the audio interface, as well as getting optimal throughput on the hard drives for recording purposes.
1. Start Building Your Music Computer.
To start building your music computer, you will have to source and install the following parts:
- A computer case and power supply with enough wattage to run your entire setup
- A motherboard and CPU, plus a CPU fan
- RAM
- Hard drives
- Graphics card
- DVD drive
- Other peripherals, including SD card readers and wireless cards
- An operating system to run all your programs
2. Install a high quality analog to digital audio interface with midi functionality. Since you need to get music into your computer, you will need a device to translate analog sound into digital streams of data. You can either choose an external device or one that attaches directly to your motherboard through a PCI slot. You will also need a midi interface, as you will want to talk to other musical equipment that has midi hookups.
3. Install a fast hard drive. Because you are recording onto the hard drive, you will want it to be at least 7200 RPM.
4. Install a FireWire PCI card. If your motherboard does not have a FireWire port, then you will probably want to install a FireWire PCI card. Most high-end digital audio equipment use the FireWire protocol, because there is less likely to be audio data loss, compared to USB. Since few motherboards have FireWire onboard, you will need to buy a separate FireWire card to add to it.