How to Build a Concrete Dog Run
Concrete dog runs are great because they allow the dog room to run outside without a leash and allows the owner to not have to watch the dog at all times. Concrete is a good choice for a run because it lasts in all types of weather and is easily cleaned as well.
Items Needed:
- Metal stakes
- String
- Tape measure
- Shovel
- Boards
- Concrete
- Broom
- Fencing
- Figure out where you want to build the concrete dog run and how big you want it to be. A good size dog run should be roughly 10-feet in both width and length.
- Map out the run using metal stakes with string attached to create an outline of the structure. To figure out how much concrete and fencing needed use a measuring tape to find the dimensions.
- Use a shovel to dig down in the location where you will pour the concrete. You should dig down 3 inches. Outline the area with boards to form the kennel area once the concrete is poured.
- Lay down a thin layer of rock where the concrete will go. Make the concrete by following the instructions on the bags. Pour the concrete into the kennel area. The kennel slab needs to be 4 inches thick and level by using a broom. The broom will create grooves in the concrete which will give the dog traction to run and not slip.
- Allow the concrete to set.
- Put up the fencing you desire around the concrete dog run and install a roof over the top to shade the dog from sunlight and other harsh weather.