How to Build a Corrugated Tin Roof
Corrugated tin is a type of roofing that is strong and resilient and is cheaper than most roofing systems. A corrugated tin roof comes in sheets of different lengths the most common is ten feet long. The sheets are relatively inexpensive and available in a wide range of colors. Building a tin roof can be done in two days depending on the size of the project.
Tools:
- Four 2-inch wide corrugated roofing sheets
- Tin snippers
- Metal screws
- Measuring tape
- Ridge cap
- Vapor barrier
Procedure:
- Roll the vapor barrier onto the roof and use staples to attach it. The barrier can be attached onto existing shingles.
- Starting from one side, measure 40-inches from the edge of the roof and place a mark. Mark the top and bottom of the roof ridge. The roofing will run vertically from the bottom overhang up to the roof ridge.
- Place the tin roofing on the chalk mark, covering the entire length of the roof. Beginning at the bottom of the roof, make sure that two inches are overhanging. Use metal screws to pin down the tin roof then overlap a second piece two inches over the first. Keep adding the sheets one at a time making sure the convex part of one sheet wraps over that of the next one. Repeat this until you reach the ridge.
- Place screws 2-inches apart, up and down the roof. Make sure you attach them on the concave part of the tin. If the last sheet is too large for the remaining space, use the tin cutters to get the desired size.
- Install the metal ridge cap after you have attached the entire roof. Ensure the ridge cap overlaps after every two inches then screw it down.
- Always use caution when working with tin. The edges of corrugated tin roofs are sharp and can easily injure you or bystanders. You will require someone to help you when building a tin roof in order to accurately mark and place the sheets.