How to Build a Fence With a Gate

Building a fence with a gate is a bit of a challenge. If you have it professionally installed, however, you must hire a contractor. A contractor, although he or she would create a beautiful fence, will charge a hefty fee. Fortunately, you could just as easily construct this fence yourself.

How to Build a Fence With a Gate:

Step 1: Install batter board four feet beyond each fence section.

Step 2: Extend mason line between the batter boards. The mason line will indicate the location of your fence line.

Step 3: Mark three feet on the mason line from the corner. Then mark four feet on the mason line from another corner.

Step 4: Begin marking fence post locations on the mason line.

Step 5: Dig holes for your fence post three feet into the ground.

Step 6: Install fence posts into the ground. Pour concrete into the holes to secure the fence posts. Allow the concrete to dry for at least 24 hours.

Step 7: Nail one brace to each side of each fence post.

Step 8: Install your rails across the top and bottom of the fence posts.

Step 9: Install your fence panels, securing them to the rails.

Step 10: Choose your location for your fence gate. Install your gate hinges according to this location. Connect your gate to your fence post. Install your gate latch according to the manufacturer's instructions.