How to Build a Floor
In order to be able to build a floor within your home, even if it is just framing a sub-floor, you will need some construction skills. You will need to have some time and patience as well. Armed with these things and a good step-by-step guide on how to build a floor, you should have no problem completing this job yourself, saving you the expense of hiring a contractor.
- Square up your foundation. This is means making sure everything is flat and adding a shimmy under any areas that aren’t flat and level.
- Set up the stair hole so that you will have enough headroom whenever you are walking down the stairs. Your stair hole should be 6 feet and 8 inches long.
- Run all of your common floor joists; do this by standing a board on its end so that it is perpendicular to the seal and then toenail heading it. Cut joints before you start the layout every 15-¼ inches then mark every 16 inches down. Attach a header to the sill as you nail the joists together.
- Run lookout blocks, which are sold at your local hardware store, along side of the floor joists on the outside walls. This will transfer the load from the studs to the foundation.
- If you are using floor bridging between the joists you will need to install them now. Run them down the center of each side of the joist. Now the floor is ready to sheet.
- Start with the longest run that you have. Make sure that the grooved side is facing outwards. After you run the first roll you will need to make sure to stagger the seams. Make sure that you glue and nail the sheeting down as you go along. Do not glue the joists that make up the stair hole though. The joists for your stair hole should only be nailed into place once you are sure that everything there is square and that it will work for your project; you don't want anyone to hit their head because they don't have room to come down the stairs.
- Continue sheeting your floor. Once you are done with this procedure you will have built a floor.