How to Build a Shadowbox Fence
When constructing a shadowbox fence, determine your measurements for both your fence and your gate. This is important to know ahead of time to ensure the correct measurements for your pickets. With these measurements, you will build an adequate fence and construct gate completely on your own.
How to Build a Shadowbox Fence:
Step 1: Create an outline for your entire fence. Mark the location for your fence posts with stakes.
Step 2: Dig holes for your fence posts. These holes should measure at least two feet.
Step 3: Install your fence posts into the holes. Pour concrete into the holes all the way around the fence posts. Allow the concrete to dry for at least 24 hours.
Step 4: Install 2-by-4s between the fence posts. Connect one at the bottom of the fence posts roughly six inches from the ground. Connect one in the midsection of the fence posts. Connect another roughly six inches from the top of the fence posts.
Step 5: Install pickets on one side of your fence. These pickets will connect to the 2-by-4s. Leave a space between the pickets that is half the width of the pickets.
Step 6: Repeat Step 5 for the opposite side of your fence. On this opposite side install your pickets in a pattern that is the exact opposite of the first side.
Step 7: Construct a gate using pickets. Attach pickets like you have for your fence. Attach one side of your gate to the fence post with brackets. Install a latch lock to the gate, and install the connector onto the fence post.