How to Build a Simple Garden Fence
Building a simple fence around a garden can protect the garden from unwanted pests and children from getting into the garden, and destroying it. Protecting the plants or vegetables can ensure their life as well as provide a nice visually appealing fence.
- Insert a T-post at the corners of the garden. They can be pounded in using a sledgehammer or other hammering tool. The height of the T-posts would depend upon the height that the fence around the garden will be. Usually a four-foot tall fence is high enough to protect the garden.
- Add support to the corners of the garden by adding two T-posts on either sides of the corner post. This will be a total of three T-posts located at each corner. This should be aligned to form a right angle. The T-posts should all be the same exact height. There are corner kits that can be purchased and placed as support to the corners as well. This will offer support in certain areas of the fence where they can become weakened over time.
- Pound additional T-posts every 15 feet along the line where the fence will be installed. To add additional strength to the fence if there are many animals that may push and weaken the fence, a separation of eight to ten feet may be considered. The T-posts should all face the same direction when installed.
- Unroll the fencing mesh by placing a stone or a large rock at one end of the roll, and then roll out the entire mesh of fencing. This will provide a long enough fence to be installed around the entire garden.
- Attach the fencing mesh to the first T-post by using fencing clips. It is typical to use about three to five clips per post. This will keep the fence securely attached.
- Install the gate by hanging it with gate hangers. The gate should be attached to one of the T-posts. The gate should be set into the hanger pins to finish the installation.