Previous Article

How Does a Motorized Tie Rack Work?

Next Article

How to Extend a Tie Rack

How to Build a Tie Rack for Horses

Tie racks are used in a variety of tasks to help keep a horse in place via cross-tied leads. Cross-tying gives owners a safe environment to groom a horse, as well as offering the vet or farrier accessible workspaces. Building a tie rack is an easy do-it-yourself project, suitable for novices and experience horse owners alike. Two parallel posts with D-rings are all that is needed.

What You'll Need:



  • Two pressure-treated posts (4-by-4 inch or larger)

  • Two D-ring loops with hardware

  • One bag concrete mix

  • Post hole digger or auger

  • Level

  • Shovel



  1. Choose a location with accessibility to water and drainage suitable for the anticipated tasks. Concrete slabs are standard and considered ideal to avoid muddy conditions when bathing the horse. Most vets and farriers prefer tie racks with concrete floors, but this is not an absolute necessity.

  2. Mark potential post placement. Posts should be at least five feet apart, but no more than eight, depending on the horse's size.

  3. Dig each posthole at least three feet deep. For large horses, such as Drafts, consider a depth of four feet to ensure the maximum stability.

  4. Insert posts into postholes and level. Be sure to level from all four sides.

  5. Back fill the posthole two-thirds of the way up with concrete mix. Do not add water. The concrete mix will absorb moisture from the ground up. Fill remaining space with dirt and tamp it down with the back of the shovel or a foot.

  6. Attach D-rings to the inner side of posts, approximately four to five feet from ground level. Allow posts to set for 48 hours before testing rings or tying out a horse.


To test ring strength, apply full body weight by hanging from the ring. If the ring cannot support the weight of an average person, it certainly will not withstand 1,000 pounds or heavier horse pulling on it.


When selecting posts for a horse tie rack, consider the size and strength of the horse. Standard 4-by-4 posts can usually withstand the strength of a pony or small horse around 14 hands high. Larger horses over 15 hands, such as Drafts or large Quarter Horses, can easily snap a 4-by-4 post. Consider 6-by-6 posts, railroad ties or metal posts for large breed horses.