How to Build a Trellis Fence

A trellis fence consists of a series of panels that form a lattice, which allows vines to climb up the trellis. Trellis fences are typically made of wood or vinyl, and are available in a variety of colors. The construction process for a trellis fences is generally the same for all materials.

• Hammer


• Wooden stakes


• String


• Post hole digger


• Gravel


• Concrete


• Fence posts


• Wooden boards


• Trellis panels


• Nails

1. Hammer a wooden stake into the ground at each corner of the area you plan to enclose with a trellis fence. Tie strings between the stakes, ensuring they are taut. The strings will mark the fence line.


2. Dig holes along the fence line with a post hole digger according to the instructions for the trellis fence. The post holes will typically be two feet deep and six feet apart.


3. Fill each post hole with six inches of gravel. This will cause water to drain from the hole, preventing wooden posts from rotting.


4. Set a post for the trellis fence into the hole. Place a length of board on each side of the post to keep it vertical.


5. Mix enough concrete for one post hole, according to the manufacturer's instructions. Fill the hole with the wet concrete until the concrete is just above ground level. Remove the boards supporting the fence post after 24 hours.


6. Place a trellis panel between two adjacent posts so that the top of the panel is level with the top of the posts. Fasten the panel to the posts with nails at six-inch intervals. Repeat this step until you finish installing the trellis fence.