Previous Article

How to Build a Luxury Closet Organizer

Next Article

How to Build Your Own Closet Organizer

How to Build a Wooden Closet Organizer

Purchasing wooden closet organizers will probably be expensive. Building an organizer yourself will not only save you money, but also allow you to customize it for yourself. If you have basic carpentry and home improvement skills this shouldn't be terribly difficult.

Items Needed:



  1. Tape Measure

  2. Wood Screws

  3. Wood Boards

  4. Table Saw

  5. Electric Drill


  1. Measure your closet's height and width and write the dimensions down. Writing them down will prevent you from forgetting. The last thing you want to forget is the size of the organizer you're trying to make.

  2. Use wide, thin boards for the vertical sides. Cut these boards to the height you measured earlier. If you’re lucky, you might be able to find boards that are the exact length you're looking for. A table saw should cut the boards efficiently.

  3. Attach another thin board to each vertical side to act as a back panel. Cut this panel at the same height as the previous boards and also at the same width you wrote down earlier. Attach the boards with an electric drill using wood screws. Most hardware stores should have wood screws. Talk with a local hardware shop expert about what type of wood screw to use.

  4. Cut pieces to use for the horizontal shelves. Make sure to cut these pieces at the proper width so they will fit between the two vertical pieces. The number of horizontal pieces you cut will be determined by how many shelves you want.

  5. Attach the horizontal shelves by screwing them into the vertical pieces using the same drill and wood screws. Make sure you measure and mark each side where you want the horizontal piece to go. You might end up with crooked shelves if you only measure one side.